- Thread starter
- #61
ripply
Well-Known Member
- 207
- 379
It's horrible. The wing is already off
Boosted 8th switching over to the 9th
- Thread starter ripply
- Start date
- Status
It's horrible. The wing is already off
- Staff
- #62
- 52,105
- 22,314
wait... did you have it painted and installed?
- Thread starter
- #63
ripply
Well-Known Member
- 207
- 379
I painted the wing and installed it myself. Painting it wasn't THAT bad. Just needed good prep work because of the abs plastic. As far as the install, everything bolted right up, not much was needed. All in all I had one 1 hole on each side of the trunk show. I just used some vinyl and unless you're up close you can't tell it's there
- Thread starter
- #64
ripply
Well-Known Member
- 207
- 379
First time ever painting body stuff but here is the result. All the pieces I painted next to the stock wing. I would say it's 99% identical to the paint. If I used another can of clearcoat it probably would have been an exact match, I just didn't want to spend more money for paint. 2 cans of DBP, 1 can of adhesion promoter, 1 can of clear cost me $70.
Christian12
Well-Known Member
The painting looked good, but that wing doesn't work, happy you took it off!
- Staff
- #66
- 52,105
- 22,314
Did you use like a pro paint gun?
- Thread starter
- #67
ripply
Well-Known Member
- 207
- 379
Thanks!
No sir. I just bought color matched spray paint from my local Napa store. I hung each piece from my garage door and began spray painting. I probably did 12 light/medium coats of paint on each piece
- Staff
- #68
- 52,105
- 22,314
looks like it turned out great for rattle can. Did you sand between coats?
- Thread starter
- #69
ripply
Well-Known Member
- 207
- 379
Nope, the only time I ever sanded was at the beginning when I was prepping the abs for paint. I wouldn't even call it sanding to be honest.. I just used steel wool to roughen up the surface
- Thread starter
- #70
ripply
Well-Known Member
- 207
- 379
Got my windows tinted today
- Thread starter
- #71
ripply
Well-Known Member
- 207
- 379
$80 for 4 wheels. Not bad 
. These will be the winter wheels I guess. I want something wider, and more aggressive for summer
. These will be the winter wheels I guess. I want something wider, and more aggressive for summer
- Thread starter
- #74
ripply
Well-Known Member
- 207
- 379
These are actually mugen gp rep wheels.
Thanks
. Going to mount them on the car this weekend and do several burnouts.
Nice. I had a boosted 8th gen (sohc) and sold that because I moved up north to CT from FL. figured I would rather have a stock car in the snow with it being my first year ever seeing snow. I'm now a proud owner of the 9th gen Si. Once I move back to FL (or atleast further south) the modding will begin. I was 08WhiteCivic on 8thcivic.
- Thread starter
- #76
ripply
Well-Known Member
- 207
- 379
Nice!! Welcome to the 9thgen community! How are you liking the car so far?
On another note, those $80 wheels turned out to be MB Weapons which cost $120 a piece. Here is how they look on the car. Holy **** wheel gap lol :deadhorse:
Annnnnnd this happened as well today.. Fg2 spoiler
. I didn't bolt it down or anything. That's why it looks a bit off but at least we get the idea. 
- Thread starter
- #78
ripply
Well-Known Member
- 207
- 379
The trunk is 1/4in smaller. I think I can make this work.. My game plan is buying a garnish from an ex/lx civic (doesn't have a brake light). Trim an 1/8in from each side of the end mounting points of the spoiler to make it sit flush with the end of the trunk, then paint it DBP. It's currently NHPB.
Thoughts and opinions on how this one looks though? I kinda seem to like it.. It's not huge like the mugen wing and it's almost Oem looking but certainly different
- Status