rbruno727
Is this the 5:00 free crack give away?
Installed FKX rear tower bar. It took out what little roll was left in the rear end.
Official 'What did you do to your car today?' Thread
- Thread starter Dar-Dar
- Start date
xXCiviXx
Well-Known Member
Installed Weathertech window visors and Skunk2 76mm exhaust yesterday. Also trying to decide Hybrid or Acuity shifter bushings and hybrid or Ktuned base bushing with 70a Rear motor mount
Danny Lugo
Well-Known Member
- 639
- 404
I installed torque solutions they are great!!
JonnyRotten
Well-Known Member
I did the ACUITY shift linkage bushings and the Hasport 70a rear motor mount. The ACUITY are a little bit better than the Hybrid bushings.
There's a lot more vibration inside the car now that I have the rear motor mount installed but I like the feel of the stiffer mount.
xXCiviXx
Well-Known Member
Have heard some people say 62a is better for daily and others say 70a should be the minimum upgrade. Gunna be a tough decision!
Also I bought the acuity linkage bushing last night, can't wait to get it and try it out!
Nix
Jötunn Moderator
At least with the Hasport mount you can swap the urethane for about $10 if you think one isn't right for you.
Michal006
Well-Known Member
All these drivers in the back are staying 5 car lengths away so they won't have to hear your exhaust.
- Staff
- #4,208
- 52,105
- 22,314
he's too fastAll these drivers in the back are staying 5 car lengths away so they won't have to hear your exhaust.
Michal006
Well-Known Member
Danny Lugo
Well-Known Member
- 639
- 404
I have the 62A and its fine specially after a couple of drives or gets better
70A I think would be to much!!
- Staff
- #4,211
- 52,105
- 22,314
it's a unicorn!You can't be fast in a civic. Get off your damn high horse.
JonnyRotten
Well-Known Member
I have the 70A and it's really stiff. The interior vibrates a lot and it's a lot louder in the cabin as well.
Personally, I don't mind it but I'm sure a lot of people would complain if they had such a stiff mount.
- Staff
- #4,213
Danny Lugo
Well-Known Member
- 639
- 404
Yeah I don't mind the 62A at all but it all depends on your goals and what you are looking to achieve but yeah o get you
xXCiviXx
Well-Known Member
Thats really good to know!
You kidding? I got V-Tac! That thing like when your heart beats fast, which is why they put it in our cars! That's why all the cars are 5 car lengths back too, not just the exhaust.You can't be fast in a civic. Get off your damn high horse.
- Staff
- #4,216
FeelinDrewzy
Well-Known Member
- 98
- 36
Just a quick cheap mod... Civic and Si badge eliminated!!
Sent from my iPhone using Tapatalk
JonnyRotten
Well-Known Member
Now just get rid of that little HONDA sticker under the tail light.
Just a quick cheap mod... Civic and Si badge eliminated!!
Sent from my iPhone using Tapatalk
FeelinDrewzy
Well-Known Member
- 98
- 36
LOL! I just did it today LOL! Rubbed some alcohol on that sticky stuff and I'm 100% clean... Nxt move is get that chrome gone and tail lights tinted
JonnyRotten
Well-Known Member
I finally took the time to take off the Si badge from the front of my car.
On the 2014 coupes, the front SI badge is stuck onto the grill so I took a sharp knife and pried the Si badge off and then used some Goo Gone to get the remaining sticky stuff off.
The spot where the badge was is still there but at least it's black so when you look at the car from the front the red Si badge isn't glaring at you anymore.
On the 2014 coupes, the front SI badge is stuck onto the grill so I took a sharp knife and pried the Si badge off and then used some Goo Gone to get the remaining sticky stuff off.
The spot where the badge was is still there but at least it's black so when you look at the car from the front the red Si badge isn't glaring at you anymore.