aznboi606's 2012 DBP coupe Build Thread

[aznboi606]

You guys see all that pollen!!!

 

[aznboi606]

Love this shot.

 

[aznboi606]

I couldn't be any happier, finally able to lay the frame down. Bagged on airliftv2.

 

[aznboi606]

I gotta air out when I park.

 

[r18-power]

Your car is super sexy! I really like your retro setup specially your shrouds

 

[aznboi606]

Your car is super sexy! I really like your retro setup specially your shrouds

Thanks man! I love the retros, makes a huge difference in driving!

 

[aznboi606]

Finally able to get the intake in. Any base map for skunk2? Waiting to get downpipe and exhaust on for a full tune. I'm currently on a base map.

 

[webby]

yeah, unfortunately you'll need a custom tune for it.

 

[aznboi606]

yeah, unfortunately you'll need a custom tune for it.

I was hoping to have one for now until I can get DP n exhaust then go for a full tune.

 

[webby]

The reflash map will suffice till you get your downpipe

 

[aznboi606]

Well good news and some bad news guys. I picked up a used sedan full race exhaust and got it done today. Polished the tip so it would look new. The bad news is that, I had the exhaust shop welded another hanger and made the exhaust more oval to clear the bags, but when I air out and air back up.... bags are rubbing about to take a hammer to this. (It was clear when I was at the shop, but when I got home, no good). Anyone experience with hammering an exhaust to clear the bag?

 

[xXCiviXx]

Maybe see if you can bend the hangar so the exhaust sits a little further from the bag?

 

[aznboi606]

Maybe see if you can bend the hangar so the exhaust sits a little further from the bag?

The exhaust shop welded another hanger to pull it away from the bags, let me get a pic when I can. I'm just going to hammer it.

 

[aznboi606]

Its been a minute, hope u guys have a great halloween. Update, finally able to get the side skirts on after sitting in my living room for a few months.

 

[Nix]

Looks good man. You get that exhaust clearance issue sorted out?

 

[aznboi606]

Looks good man. You get that exhaust clearance issue sorted out?

Yea I did, hammered the hell out of it lol. Just picked up PLM DP. Let the tuning begin!

 

[aznboi606]

Time for a change. My 2nd set of retros. D2s 4.0 w/ Apollo 3.0 shrouds. Old set going off to its new owner... These projectors are amazing!!

 

[aznboi606]

If anyone wants to do retros, I recommend d2s 4.0. way much better than the mini h1s... High beams are insanely bright!!

 

[thejumpoff]

Great output! Which bulbs are you using with the 4.0's?


Sent from my iPad using Tapatalk

 

[aznboi606]

Great output! Which bulbs are you using with the 4.0's?


Sent from my iPad using Tapatalk

I went with innovited 5k 55w that I got from Amazon. Couldn't afford the hid kit from trs.. my buddies have the morimoto kit, not much of a differences in my opinion.