Injen Intakes 2012 Civic Si Update - Email & Dyno

Michael Hogains

Well-Known Member

It fits with the tbs but very tight going through the idle learning as i write this
 

Michael Hogains

Well-Known Member
they re routed the anti freeze houses so that its shorter because it was in the way and took off the mafs clip to give it some slack and added a inch rubber screw insert where the intake bolts onto on the bottom the first pic i posted right above the filter. Also had a hard time putting back the battery tray it didnt want to go back in
 

NthTier

Well-Known Member
133
55
Chicagoland
Vehicle Model
Civic Si
Body Style
Sedan
Yeah, those under bolts on the battery tray are a pain. Are they easier to get to from under the car (already went through the 1/4 turn at a time ratcheting them tight...more for those that have not installed yet)?
 

Eddie Blanco

Well-Known Member
976
654
Yeah, those under bolts on the battery tray are a pain. Are they easier to get to from under the car (already went through the 1/4 turn at a time ratcheting them tight...more for those that have not installed yet)?
I totally agree with NthTier again....remove all the resonator pieces and go through the driver side wheel well, it's much easier to access the bottom bolts on the battery tray.
 
Top