Turbo+ AWD!!!!!

07TLX

Well-Known Member
4,436
1,596
Somewhere in SEPA
Vehicle Model
Pontiac
Body Style
G8 GT
Front brakes rotors and rsb... And this is prob gonna be the last time I ask on Jason to work on the car, he has done enough and dealt with enough Honda bs to last a lifetime...
 

death_roll

Well-Known Member
3,780
2,593
Always
Vehicle Model
a happy face
Front brakes rotors and rsb... And this is prob gonna be the last time I ask on Jason to work on the car, he has done enough and dealt with enough Honda bs to last a lifetime...

better post pics of the shards of metal that were your oem rotors :D
 

07TLX

Well-Known Member
4,436
1,596
Somewhere in SEPA
Vehicle Model
Pontiac
Body Style
G8 GT
Jason had to use some love from a chisel to get them off.... Note to people don't go 123k miles before changing rotors
 

death_roll

Well-Known Member
3,780
2,593
Always
Vehicle Model
a happy face
The right side was relatively easy to get off, the tapered screws holding the rotors off were easily drilled out and the rotor was broken off with a hammer. The driver's side someone previously tried using an easy-out and a screwdriver and failed miserably, so the drill had extra work to do.
 

webby

Administrator
Admin
Toys For Tots
52,105
22,314
and the first documented wreck....





wonder what the wait time is on body panels??? :think:

He says that he was a previous owner of B16-swapped Honda CRX and that he had taken the same wide turn "a million times over the past 4 years". With traction control turned off, he entered the turn at about 20mph. Halfway through it, he got on the gas and can't remember exactly what happened after that. The driver said that both airbags went off but neither he nor his coworker was hurt. The car ended up smashing it into a telephone pole.
 
Top