18x9 +20 offset?

[WhereIsBurkey]

Would it work? Im close to buying some just not sure how the fitment will be. Anyone know?

 

[S2KJAY]

I mean your gonna need some super stretched tires, and flare/shave your fenders. 18's will run like crazy. I'm running + 38's (18x9.5), Ave that seems about Maxed on my civic for 18's. Now, 17's is another story.. I'd you have stock si wheels, your new wheels will come out 50 more millimeters than it currently is.

 

[WhereIsBurkey]

Thanks man. Im up in the air. So you'd say 17s would be better? S2KJAY

 

[webby]

17x9 +22ET running like -4 camber.

JayDieM.TraN ^

===

BrandneW below
specs-18x9.5 +23
tires-215-35-18

 

[WhereIsBurkey]

Thanks webby. So as long as I roll my fenders I should be good correct?

 

[webby]

I believe BrandneW didn't have any fender work because he's stretching tire so much, but let him chime in.

 

[S2KJAY]

I love the look of 18's, but that big of a wheel just takes up too much space... +20's will hit the outside of your fender unless you flare/shave the inside of your Fender... 17's allow for a much more aggressive offset. My 18's poke out pass my Fender about 3/4" , that's plenty good enough for a civic I.m.o.

 

[S2KJAY]

17x9 +22ET running like -4 camber.

JayDieM.TraN ^

===

BrandneW below
specs-18x9.5 +23
tires-215-35-18

Did he change to super stiff spring rates? If he hits a bump those rims are sure to hit the fender

 

[webby]

as far as I know he's still on d2 coilovers

 

[JOhn]

your wheels will sit 4.6mm in more then brandnew's so just run a 215 35 18 and you'll be good

 

[Mwebb]

That fitting on the PMM looks really good. I think i might be going for the same look. Is there any issues with the TPMS when swapping wheels?

 

[webby]

you just need to have the tpms moved over to the new wheels and you will have no issue.

 

[BrandneW]

Thanks webby. So as long as I roll my fenders I should be good correct?

I didnt have to roll my fenders at all but it did touch on big dips on highway i didn't drive on highway so it didnt matter for me but im sure if I had lil cam i woul be a problem but den i woul suggest gettin 225

 

[BrandneW]

or shave 4.6 mm off the wheel that JOhn suggested fit perfect with the conclaves look on the wheels the have them 18/9+ 30 but dont know if the face of the wheels look exact

 

[HoustonJohn]

I have a friend that's running 18x9 in the rear 18x8 in the front. Looks aggressive af & with his drop it just makes it that much better.