DIY 9thcivic 2012+ Civic Sedan Fog Lights DIY

[webby]

9thcivic 2012+ Civic Sedan Fog Lights Installation DIY

Part# 08V31-TR0-XXX
Application: 2012 Civic 4dr except Si

View: http://youtu.be/S45O8Lu9ao4


2012 Civic 4-Door Fog Lights


Full PDF Installation Document Below:

http://9thcivic.com/forum/pages/2012-Civic-4-Door-Fog-Lights/

 

[happyshoppping]

wow a nice car and the lights are so great

 

[eyekon]

My car's an LX and doesn't have the actual fog light activation switch. Can that switch that's part of the headlight be purchased?

 

[webby]

My car's an LX and doesn't have the actual fog light activation switch. Can that switch that's part of the headlight be purchased?

if you have a 2012 sedan -
http://www.collegehillshonda.com/product/08V31-TR0.html

that provides the lights and the switch shown in the video above.

 

[Pauly99to17]

My car's an LX and doesn't have the actual fog light activation switch. Can that switch that's part of the headlight be purchased?

Do you know about this DIY?

http://9thcivic.com/forum/threads/add-fog-lights-to-2012-lx.8757/

 

[eyekon]

that looks nice but i have the 2013 i'll take pics when i get home and wife's home with the car ( trippin out her car LOL)

 

[shekki]

So I saw a thread where someone said you could cut the LX bumper on the 12 civic instead of purchasing a new bumper. Apparently there are lines on the inside of the bumper that show where the fogs go. Anyone know if this true?

 

[webby]

So I saw a thread where someone said you could cut the LX bumper on the 12 civic instead of purchasing a new bumper. Apparently there are lines on the inside of the bumper that show where the fogs go. Anyone know if this true?

did you watch the video? At like 1:18 into the video it shows them taking the blanks out

 

[Pauly99to17]

So I saw a thread where someone said you could cut the LX bumper on the 12 civic instead of purchasing a new bumper. Apparently there are lines on the inside of the bumper that show where the fogs go. Anyone know if this true?

Yes, I made a DIY. Pictures of those cutout lines.

http://9thcivic.com/forum/threads/add-fog-lights-to-2012-lx.8757/

 

[shekki]

did you watch the video? At like 1:18 into the video it shows them taking the blanks out

The lx model doesn't have blanks at all. I've seen the video before though.

 

[CoolMistLX]

Yes, you have to cut the LX bumper and yes, the lines are marked on the inside of the bumper. The College Hills Honda video is not an LX and that's why there are blanks and no cutting. Pauly's DIY is for the LX.

 

[chucksomerock]

If you are considering buying an aftermarket kit (such as the Syper kit from amazon), look at my DIY:
http://9thcivic.com/forum/threads/fog-light-install-2012-m5-ex-sedan.13811/

 

[shekki]

Yes, you have to cut the LX bumper and yes, the lines are marked on the inside of the bumper. The College Hills Honda video is not an LX and that's why there are blanks and no cutting. Pauly's DIY is for the LX.

Yes, I made a DIY. Pictures of those cutout lines.

http://9thcivic.com/forum/threads/add-fog-lights-to-2012-lx.8757/

Thanks for the info. I'll definitely be looking at pauly's diy when I decide to get some fogs for my car.



Sent from my iPhone using Tapatalk