DIY AP's Bi-Xenon Retrofit DIY Guide

[Pauly99to17]

Oops

 

[the insider]

Plus shipping and duties add another $119.00.

I bought a set - free shipping and webby set them to my US "address"

 

[webby]

that I did !

 

[the insider]

And they've arrived!

 

[webby]

 

[AlienPrime]

I bought a set - free shipping and webby set them to my US "address"

what about for those of use that like 7+ hours from the border?

 

[seankim]

I'm selling the mini h1's for $85/shipped in the US
http://9thcivic.com/store/index.php?route=product/product&product_id=97

There are also a ton of ebay sellers who sell the h1 bulbs/hid ballasts in a set for around $35 dollars total. It can be done cheaper than listed above.

is this projector just easy to install. i watch alienprime diy . do not show how to alline projector.this looks very simple job but i am kina wander. your projuctor just fit stock bulb housing . let me know,. thanks.

 

[webby]

The projector fits into the stock bulb hole in the headlight housing. It tightens down with a nut on the back side of the headlight. You just rotate the projector to keep the beam horizontal. You can adjust it endlessly to your liking by turning it.

 

[seankim]

The projector fits into the stock bulb hole in the headlight housing. It tightens down with a nut on the back side of the headlight. You just rotate the projector to keep the beam horizontal. You can adjust it endlessly to your liking by turning it.

so i just need take a part headlight housing, put the projector in to headlight bulb hole?
sounds so good. but i am really worry about aline that projector. after took out i am not sure about aline that.
if any one has picture of diy . really help. or i might get from ebay. i found copy of asian head light(projector )
only for 200.

 

[seankim]

also i just installed maxlux 35w hid kit. its MADE IN KOREA . i should take afew picture of this kit.
blaster kina big but bulb looks like very good qt. has correct 5000k color . i really like. last time i put
ebay 55w unknow junk .i got ecu fried.i even call them(korea)
i am lucky i can speak korean so well . before i bought us seller . comform
factory stay there for 10years has very good feedback.
i was try to get morimoto hid kit. but blaster was good but bulb.i do not know where they made.

 

[Goldfish]

Great write up! If I have any questions when I start my retro-fit, I'll be sure to ask you.

 

[AlienPrime]

for sure man

 

[Edmundo27]

What's the difference between the morimoto h1 and the h1 projectors I can buy on amazon??? I got ones in $60 for my 92 accord

 

[Edmundo27]

I haven't put then in my accord yet cause they one of the projectors dident came with the adaptors plate

 

[FRDRICE]

You shouldn't need the adapter plates for our headlights.

The ones that are $60 are usually either a older version or are not tuned for optimal output.

 

[AlienPrime]

whats the difference between philips HID ballasts and ebay ballast? Whats the difference between Honda and Acura? Same thing.

 

[johnnyboy83]

Looking into doin' this retrofit, but I have one question . Why cant we use our oem low/high switch to trigger the bi-xenon selenoïd. There must be a way to do it.

 

[FRDRICE]

You can, you either plug the 9005 high beam plug into the projector or run a high beam splitter

 

[AlienPrime]

Looking into doin' this retrofit, but I have one question . Why cant we use our oem low/high switch to trigger the bi-xenon selenoïd. There must be a way to do it.

whoever said you can't? LOL!

Just do it however you want Tie it into light beam trigger wire

Or whatever else you want

 

[johnnyboy83]

Thanks guys, ordering the full kit from trs now