Tony An
Do u know Dokdo?
Attachments
-
image.jpg
Dragon Spring Mini meet
- Thread starter sonej4
- Start date
Tony An
Do u know Dokdo?
Last edited:
Tony An
Do u know Dokdo?
- Staff
- #264
- 52,105
- 22,314
only 1 pic showing two posts up
KennyGS
How may I help?
- Thread starter
- #267
sonej4
Well-Known Member
- 1,166
- 847
I am to removing the front subframe. What a pita.
Have yourself a cold one. Completely unrelated...
I've been wondering what a Go Pro vid might look like mounted from the side of my Mugen wing.
- Thread starter
- #269
sonej4
Well-Known Member
- 1,166
- 847
I would, but I am at work now. Planning to finish everything over the weekend.
Completely unrelated...
I've been wondering what a Go Pro vid might look like mounted from the side of my Mugen wing.
Tony An
Do u know Dokdo?
Tony An
Do u know Dokdo?
Tony An
Do u know Dokdo?
As always Tony An ....great pics sir! 
I like how my Space Battleship Yamato found it's way in there.
I like how my Space Battleship Yamato found it's way in there.
- Thread starter
- #274
sonej4
Well-Known Member
- 1,166
- 847
Got to the clutch and the throw out bearing is toast. The clutch lost a spring, or at least part of the way.
Last edited:
death_roll
Well-Known Member
- Thread starter
- #276
sonej4
Well-Known Member
- 1,166
- 847
Thanks. Yeah the electric steering wasn't too bad. Just 4 connectors. Now I just need some sleep, then I can finish tomorrow.
Last edited:
- Staff
- #277
Do Work!
PainIs4ThaWeak
Well-Known Member
Is it just me or does that disc still look ok? Contrary to my initial assumption the springs, as well as the friction material, look to still be in acceptable condition.Got to the clutch and the throw out bearing is toast. The clutch lost a spring, or at least part of the way.
.... Annnnd, finally finished the minor editing of one of my runs from the trip. Be easy on me, I only had one camera feed to use. But opinions are welcome
View: https://www.youtube.com/watch?v=UPcLCY0MpXI&feature=youtube_gdata_player
- Thread starter
- #279
sonej4
Well-Known Member
- 1,166
- 847
If you look closely at the clutch disc, the spring closest to the pressure plate is partially out. It was rubbing the fingers on the pressure plate, and a piece of the clutch had broken off that was holding the spring in.Is it just me or does that disc still look ok? Contrary to my initial assumption the springs, as well as the friction material, look to still be in acceptable condition.
.... Annnnd, finally finished the minor editing of one of my runs from the trip. Be easy on me, I only had one camera feed to use. But opinions are welcome
r
PainIs4ThaWeak
Well-Known Member
Ah - gotcha. I see it now