JonnyRotten
Well-Known Member
For anyone who's thinking of taking the i-VTEC decals off the side of their vehicle you must be very patient. Start on whichever side you chose to start on and try and get as much of the side started as you can and then with even pressure pull VERY slowly. The decals are very thin and stretch and rip easily. If you don't take your time and get the whole side of the decal started so that you can pull slowly straight across, you will be there forever picking off little pieces. I would also suggest that you work on this when it's warm out but don't heat the decals up with a heat gun or hair dryer. If they are too warm they will stretch and rip even more.
That's from my experience anyway......
BEFORE:
AFTER:
.....clean
That's from my experience anyway......
BEFORE:
AFTER:
.....clean