12civic5speed
Well-Known Member
Agree
installing sliding arm rest next week!
- Thread starter meatball_84
- Start date
JonnyRotten
Well-Known Member
TJ___90
Well-Known Member
It seems he has s having fun.... Or he lives in planet Venus a full day is more that 200 earth days so maybe we just need 195 days tell the sun comes out and see some pics
- Thread starter
- #45
meatball_84
Well-Known Member
Difficulty level 1/10
So anyone can do it! Feel free to PM me with questions. If you live in the Denver area I would be more than happy to help any one with ordering the pieces and installing them.
Forgot the sheet with the part numbers at work. I will update this post tomorrow while its slow at the store. Its hard to get good lighting with a black interior to do the DIY pictures. It is very easy though. Just grab the back panel of the center console and pry it off (see the last picture). Inside you will see a piece of metal about two inches long (we'll call this a washer) on the drivers side that attaches to the hinge pin. Remove the screw from the bottom of the hinge pin washer and remove the hinge pin then pull out the armrest lid and insert the new hinge assembly into the same spot. Re-insert the hinge pin and put the screw back in the bottom. Then just put the rear cover back on. Shouldn't take more than about ten minutes.
It comes in two pieces though. the hinge and the cover. The hinge and lid have the sliding piece pre-attached from the factory, but you will want to pull off the sliding piece because the cushion will have one already attached. Just yank it off, you wont break anything. Then take the new cushion and put it on. You will have to give it a few bumps with the bottom of your fist to get it on properly and align it with the gears inside. Then just pull it forward and back to make sure it works.
Here are some pics of standard position and the forward position. The whole armrest sits a bit higher than stock, which I like. Overall it is much more comfortable. Well worth the price!
This is the rear panel that needs to be removed to get to the hinge pin
Merry Christmas!
So anyone can do it! Feel free to PM me with questions. If you live in the Denver area I would be more than happy to help any one with ordering the pieces and installing them.
Forgot the sheet with the part numbers at work. I will update this post tomorrow while its slow at the store. Its hard to get good lighting with a black interior to do the DIY pictures. It is very easy though. Just grab the back panel of the center console and pry it off (see the last picture). Inside you will see a piece of metal about two inches long (we'll call this a washer) on the drivers side that attaches to the hinge pin. Remove the screw from the bottom of the hinge pin washer and remove the hinge pin then pull out the armrest lid and insert the new hinge assembly into the same spot. Re-insert the hinge pin and put the screw back in the bottom. Then just put the rear cover back on. Shouldn't take more than about ten minutes.
It comes in two pieces though. the hinge and the cover. The hinge and lid have the sliding piece pre-attached from the factory, but you will want to pull off the sliding piece because the cushion will have one already attached. Just yank it off, you wont break anything. Then take the new cushion and put it on. You will have to give it a few bumps with the bottom of your fist to get it on properly and align it with the gears inside. Then just pull it forward and back to make sure it works.
Here are some pics of standard position and the forward position. The whole armrest sits a bit higher than stock, which I like. Overall it is much more comfortable. Well worth the price!
This is the rear panel that needs to be removed to get to the hinge pin
Merry Christmas!
- Staff
- #46
- 25,544
- 10,598
Awesome! Thanks for posting this!
JonnyRotten
Well-Known Member
So it looks like the cushion is covered in the same fabric as used in the 12th gen and it matches. Is it the exact same colour?
Thanks meatball for sharing this with us!
- Thread starter
- #49
meatball_84
Well-Known Member
Yes. the fabric is the same
jasonandre
Deal with it
djax
Well-Known Member
- 84
- 54
Thanks for updating the DIY! Looks great 
- Thread starter
- #52
meatball_84
Well-Known Member
For some reason I cannot edit my post to add the part numbers so here they are.
Hinge Assembly Black
83460-TRO-G01ZB - List Price $49.22
Cushion Si Black
83450-TR7-C02ZA - List price $49.22
Hinge Assembly Black
83460-TRO-G01ZB - List Price $49.22
Cushion Si Black
83450-TR7-C02ZA - List price $49.22
JonnyRotten
Well-Known Member
I'm doin it!
I have a feeling Honda is going to see a bunch of orders for the sliding arm rests.
I have a feeling Honda is going to see a bunch of orders for the sliding arm rests.
jasonandre
Deal with it
Yep, I'm ordering the parts today.
Flippercon
Well-Known Member
Wow an exact match. Looks great!
- Staff
- #56
- 52,105
- 22,314
hotdogjohnny
Well-Known Member
Luck!
CivicCanuck
Well-Known Member
Is the sliding portion available for the non SI models as well>? If so, I would like to get one, also is the fabric the same? ( talking non SI models )
- Thread starter
- #60
meatball_84
Well-Known Member
Yes all models in 13 have the slider. The fabric might not be an exact match as they did change all models except the Si's fabric. Just confirm with the parts department you ordered from that you are getting the right piece.