JDM Valve cover

[nemesis249mp]

Does anyone know if we can purchase these anywhere?

I have checked the vendors and don't see anything. Any help would be appreciated.

 

[Michal006]

Jdm or carbon fiber? I don't think there is jdm valve cover

 

[nemesis249mp]

The red valve cover; or is that discontinued

 

[Nomar06]

Jdm or carbon fiber? I don't there is jdm valve cover

I believe he means this....




Not 100% sure, but I think the K24 and the K20 motors use the same cover. If they do, then you should be able to buy it from a bunch of places online.

 

[nemesis249mp]

Exactly what I mean...anyone 100% on the putting a k20 valve cover on a 15 si?

 

[Michal006]

Why not remove your original valve cover and paint it?

 

[Nomar06]

Why not remove your original valve cover and paint it?

It is a decent option but from the ones I've seen that have the wrinkle red paint, they don't come out as nice as the one you can buy.

 

[Michal006]

http://stores.axionind.com/valve-cover-powdercoating/

They sell powder coated covers.

 

[Flightmaster127]

not 100% sure on this but I remember reading somewhere that if you use the k20a (type r) valve cover on the k24z7 it will leak oil by the cam sprockets because the k24 valve cover is slightly wider. Again not 100% sure.

 

[Dar-Dar]

not 100% sure on this but I remember reading somewhere that if you use the k20a (type r) valve cover on the k24z7 it will leak oil by the cam sprockets because the k24 valve cover is slightly wider. Again not 100% sure.

Yes, leaking will occur due to the differences in dimensions.

The K20 valve cover is not interchangeable with the 2012-2015 K24 VC.

 

[nemesis249mp]

Thank you for the insight and I am not liking the powder coated look.

 

[ClearCutSi]

If you use a good Powdercoater, he or she should be able to do wrinkle finish for you.

 

[johnmiers19]

Does anyone know if we can purchase these anywhere?

I have checked the vendors and don't see anything. Any help would be appreciated.

Look in ebay [emoji3]

 

[victor nieves]

k20 valve will not work with out modification. the k24 side is wider on the cam gear side and k20 will have to shaved down for proper fitment and clearing of internals.