K24Z7 Cams and Headwork

[axion_industries]

Just wanted to let everyone know that we have begun work to be the first company to bring out cams for the K24z7 motor. We are in the middle of porting the cylinder head to see the gains and figure out the cam configuration to do with this motor that will make power. The exhaust cam from graphing out is extremely small, so with opening the exhaust side up and doing a larger cam, we think there will be some nice gains.

We will keep everyone updated with what is going on and will eventually have a group buy in to see who is interested in some cams.

 

[323]

@squiggy

 

[squiggy]

@squiggy

I saw it already!

 

[323]

I saw it already!

time to start putting some money aside

 

[squiggy]

time to start putting some money aside

Bah! There is already plenty in the bank. Of course, if I did cams, I would want to do springs and valves at the same time.

 

[axion_industries]

Should have flow results within the next month and then we start with making billet cam blanks and go from there... We wont be releasing cams unless they are worth the money. All testing will be done on our shop Civic Si with back to back testing for good results... Its going to get exciting and a good 2014

 

[axion_industries]

Bah! There is already plenty in the bank. Of course, if I did cams, I would want to do springs and valves at the same time.

Springs and retainers would be required as the stock cam is very small, this being said I think we can make some good power with the upgrade

 

[squiggy]

Springs and retainers would be required as the stock cam is very small, this being said I think we can make some good power with the upgrade

Would you be offering all of these components as a kit?

 

[axion_industries]

Yes we would, everything needed for the upgrade would be included

 

[323]

Yes we would, everything needed for the upgrade would be included

that's what i like to hear!
what about some sort of install guide?

 

[axion_industries]

We can reference the Honda manual.... Everything would be a direct swap based off the Honda specs

 

[323]

We can reference the Honda manual.... Everything would be a direct swap based off the Honda specs

the same way you did for the RBC swap? that helped me greatly when installing

 

[axion_industries]

We will have something.. We always try to spend our time with each customer so they can learn what they are doing...

 

[webby]

This is excellent news.

 

[Arm0ged0n]

Great news bro!

 

[2013k24]

Oh hell yeah...I can see where my tax money is going to haha

 

[WhereIsBurkey]

so wheres this group buy link?

 

[axion_industries]

Once I get some numbers on cost then I will do a intro list for people interested and take down payments closer to the release

 

[2013_Si_Guy]

Do you have a rough idea on how much it will cost?

 

[axion_industries]

I honestly have no idea at this point, we have just started graphing everything. We are waiting the flow results from the factory head to understand the cams that will even work.