Mother Of All Whore Threads Non-VIP Edition v.1

Honda-Fan

Honda-Fan

Well-Known Member
1,575
1,486
Dallas, Texas
Vehicle Model
Civic LX
Body Style
Coupe
bootyluvr said:
Alright. Workin' it :) About to go replace a fuser in an HP LaserJet M506... I hate printers

How about you?
Click to expand...

Training some folks from another department today, so I can't goof off ...as much. :eyebrows:

fahnix said:
Bleh, we've got a Ricoh Copier replacement happening next week. Gonna have a team of 4 or us setting up and configuring all the new machines. I think it's supposed to be like 30 machines or so.

Sent from my Pixel 3 using Tapatalk
Click to expand...

Oh they're doing that here, too :confused: -- it's like everyone's hooked up with Ricoh lately.
 
bootyluvr

bootyluvr

Well-Known Member
19,859
7,696
Baltimore, MD
Vehicle Model
2015 Honda Accord EX-L V6
Replaced the fuser on the HP LaserJet M506 and no more fuser error message but when trying to print test pages they would get stuck under the cartridge area by the transfer roller. After removing/replacing the transfer roller the problem still was occurring. It ended up being the cartridge that was causing the jams... Thanks re-manufactured cartridges. I borrowed a known working cartridge from another M506 in the office and it worked without issue. Put the bad cartridge in the other M506 in the office and it did the same thing. So I talked to the staff that has/ordered cartridges and she provided me a new one and that worked fine. She will contact the company she orders them from to get it swapped out.

I hate printers!

fahnix said:
Bleh, we've got a Ricoh Copier replacement happening next week. Gonna have a team of 4 or us setting up and configuring all the new machines. I think it's supposed to be like 30 machines or so.
Click to expand...

Wait... You you need 4 people to touch 30 machines? :confused:

Honda-Fan said:
Training some folks from another department today, so I can't goof off ...as much. :eyebrows:
Click to expand...

So it's a normal day then? :rotfl:
 
webby

webby

Administrator
Admin
Toys For Tots
52,105
22,314
JAMES JANZEN

JAMES JANZEN

Well-Known Member
772
528
Ontario Canada
Vehicle Model
Honda Civic SI
Body Style
sedan
remind me to never have stuff shipped from walmart again. my xbox controllers been sitting in the destination city waiting for the out for delivery notification for almost 2 weeks.
 
fahnix

fahnix

Well-Known Member
1,123
810
SoCal
Vehicle Model
Civic Si
Body Style
Coupe
bootyluvr said:
Replaced the fuser on the HP LaserJet M506 and no more fuser error message but when trying to print test pages they would get stuck under the cartridge area by the transfer roller. After removing/replacing the transfer roller the problem still was occurring. It ended up being the cartridge that was causing the jams... Thanks re-manufactured cartridges. I borrowed a known working cartridge from another M506 in the office and it worked without issue. Put the bad cartridge in the other M506 in the office and it did the same thing. So I talked to the staff that has/ordered cartridges and she provided me a new one and that worked fine. She will contact the company she orders them from to get it swapped out.

I hate printers!



Wait... You you need 4 people to touch 30 machines? :confused:
Click to expand...

I hate printers too. Glad we don't really have to support them. It's time for them to be updated per the vendor contract, and the setup is one part that we're actually on the hook for. Setup takes about 40 mins per machine according to management who's done a few to pilot the process. So there are going to be 4 of us that take care of it over 3 or 4 days. At least we just have to remote into them to do the set up. I definitely would NOT have volunteered if we had to physically stand at the MFP. Screw that. :D
 
bootyluvr

bootyluvr

Well-Known Member
19,859
7,696
Baltimore, MD
Vehicle Model
2015 Honda Accord EX-L V6
fahnix said:
I hate printers too. Glad we don't really have to support them. It's time for them to be updated per the vendor contract, and the setup is one part that we're actually on the hook for. Setup takes about 40 mins per machine according to management who's done a few to pilot the process. So there are going to be 4 of us that take care of it over 3 or 4 days. At least we just have to remote into them to do the set up. I definitely would NOT have volunteered if we had to physically stand at the MFP. Screw that. :D
Click to expand...

We have Ricoh and Canon copiers. Both vendors send out techs to setup the copier (connect pieces, enable staple function, ect). We (my team) are responsible for getting the MAC address of the new copiers and send that info to the network team so they can add them to IPAM. Once added then we can install the copiers on users PC's.

We use PrinterLogic (Deliver a Serverless Printing Infrastructure and keep print jobs local - https://www.printerlogic.com/) for our printers/copiers. Not every PC has it installed (Win10 it is installed by default but we still have a lot of Win7 PC's that don't get it force installed)
 
fahnix

fahnix

Well-Known Member
1,123
810
SoCal
Vehicle Model
Civic Si
Body Style
Coupe
bootyluvr said:
We have Ricoh and Canon copiers. Both vendors send out techs to setup the copier (connect pieces, enable staple function, ect). We (my team) are responsible for getting the MAC address of the new copiers and send that info to the network team so they can add them to IPAM. Once added then we can install the copiers on users PC's.

We use PrinterLogic (Deliver a Serverless Printing Infrastructure and keep print jobs local - https://www.printerlogic.com/) for our printers/copiers. Not every PC has it installed (Win10 it is installed by default but we still have a lot of Win7 PC's that don't get it force installed)
Click to expand...
Ha. Same besides the Canon stuff. They're all Ricoh. But all machines on the domain use PL. It's part of the image for the PC side and on Mac it's installed automatically during provisioning.
 
JesseFB6

JesseFB6

Well-Known Member
303
243
Chino, CA
Vehicle Model
Civic Si
Body Style
Sedan
random....but is it not ideal adjusting camber yourself? ir is that something that should only be left to your Alignment guy to handle?
 
JesseFB6

JesseFB6

Well-Known Member
303
243
Chino, CA
Vehicle Model
Civic Si
Body Style
Sedan
but my alignment is perfect i just dont like the camber. i told the alignment shop to adjust my camber arms to give me negative 2.5

however i dont like it hahaha stupid i know.
 
bauer311

bauer311

Well-Known Member
3,083
2,093
Fayetteville, NC
Vehicle Model
Civic Si
Body Style
Sedan
JesseFB6 said:
but my alignment is perfect i just dont like the camber. i told the alignment shop to adjust my camber arms to give me negative 2.5

however i dont like it hahaha stupid i know.
Click to expand...
This was my camber at -1° on my 15 coupe
 
bauer311

bauer311

Well-Known Member
3,083
2,093
Fayetteville, NC
Vehicle Model
Civic Si
Body Style
Sedan
The more i keep looking on marketplace seems like I'll have to save up about $2k-$3k to get a decent car to start with. Rarely one will pop up for a great deal,but unless i catch it on the weekend i wont be able to respond fast enough most likely since i can't have my phone at work. The search continues though. But it seems like it'll be a bit before i can save up that much, like 3-4 months if my math is right...
 
You must log in or register to reply here.
Top