Official 'What did you do to your car today?' Thread

[stilletto]

you should snap a pic of ride height...

Will do. I've still got a couple leaks I need to find, but I'll snap a couple pics once I get the Enkeis mounted.

 

[Dagumi]

Finally got around to doing the resonator delete tonight, took me about an hour. Might have been a little quicker if I had actually taken the wheel off.



Unfortunately, I ended up shattering 11 out of the 13 little plastic clips I had to pull off into a million little pieces, so I'll be making a trip to the Honda dealership tomorrow for replacements.
Looking forward to hearing the difference tomorrow morning after I get the fender liner reattached.

 

[webby]

Finally got around to doing the resonator delete tonight, took me about an hour. Might have been a little quicker if I had actually taken the wheel off.

View attachment 51934 View attachment 51935

Unfortunately, I ended up shattering 11 out of the 13 little plastic clips I had to pull off into a million little pieces, so I'll be making a trip to the Honda dealership tomorrow for replacements.
Looking forward to hearing the difference tomorrow morning after I get the fender liner reattached.

you need one of these bad boys
Amazon productView: http://www.amazon.com/Lisle-41250-Push-Pin-Pliers/dp/B00EARCXXG/

 

[13blacksedan]

Finally got around to doing the resonator delete tonight, took me about an hour. Might have been a little quicker if I had actually taken the wheel off.

View attachment 51934 View attachment 51935

Unfortunately, I ended up shattering 11 out of the 13 little plastic clips I had to pull off into a million little pieces, so I'll be making a trip to the Honda dealership tomorrow for replacements.
Looking forward to hearing the difference tomorrow morning after I get the fender liner reattached.

The delete and K&N sound good together. Webby is right tho, the right tools make the difference.

 

[rbruno727]

Fresh tint for them Florida summers.


And ordered this FKX rear strut bar.

 

[Danny Lugo]

The mount will soften up a little after about 200 miles or so of regular driving. The vibrations won't be nearly as noticeable then.

You have it installed?

 

[Flightmaster127]

You have it installed?

Yes. You will still have some vibrations after it loosens up but not nearly as noticeable as it is now. Mostly you'll feel it vibrate right around 1200-1500rpm when your taking off from a dead stop.

 

[Danny Lugo]

Yes. You will still have some vibrations after it loosens up but not nearly as noticeable as it is now. Mostly you'll feel it vibrate right around 1200-1500rpm when your taking off from a dead stop.

Yeah now it feels like that yesterday we went to the dyno and already it has loosened up

 

[Flightmaster127]

Yeah now it feels like that yesterday we went to the dyno and already it has loosened up

Yeah the mount helps so much with reducing wheel hop. You'll catch yourself chirping the tires from a dead stop sometimes without meaning to especially when your taking off and turning at the same time.

 

[Danny Lugo]

Yeah

 

[Asgaard]

Just installed the mount and it vibrates a little but the car feels freaking awesome no movement of the engine it feels like everything is held up fine

Didnt liked the mount at first. Found the vibrations to be a bit too intrusive. It gets better over time ( break in + getting used to it ).

 

[Jake LXer]

Took a picture of the whip, will also be the last photo with these ugly wheels until next winter

 

[FooBird]

Oil change, return of the summer rubber and 18" HFP wheels, and wash to make her clean again.

 

[Flightmaster127]

Installed my progress 24mm rear sway bar.

 

[Danny Lugo]

So I ordered the RBC ported manifold from Axion Industries with the conversion to use the stock spar plugs!!!

 

[z00mer]

And ordered this FKX rear strut bar.
View attachment 51937

Once you receive the rear strut be sure to post pics and report if it does improve the rigidity.

 

[twister8008]

I loaded these in the trunk

 

[z00mer]

A night of 3M wrapping with the help of a friend.

 

[SlySi]

Hybrid Racing Shifter base bushing
TWM performance short throw shifter

Mtec race spring and Hybrid racing cable bushing up next

Before



AFTER

 

[bootyluvr]

Replaced Intake Filter & Cabin Air Filter.