Betty White tying da twisties like skrewlaces Wit dat possible *Whine* on teh Side... bout dat lyfe.

eteby4uq.jpg


qyqezapy.jpg


nesyvypu.jpg


eha2azan.jpg


ebu9atan.jpg


yhedyhyn.jpg


ybaze7a4.jpg


a4u8eba5.jpg
 
Six_speed_demon said:
Because I was testing the kit for the 2013 sedan and it was 1k lower but the kmod kit is 85% PRL anyway.... So it was a little bit of a saving
Click to expand...
Oh wicked ur the tester for the kmod turbo kit for the 13/14 si sedan?
And you're saying kmod is better because its cheeper?
 
Last edited:
ErckleSi said:
Oh wicked ur the tester for the kmod turbo kit for the 13/14 si?
And ur saying kmod is better cause its cheeper?
Click to expand...
Yes kinda but like I said 80% of kmod kit is PRL. The manifold the Downpipe the CAI the dump tube and the turbo all came from PRL. He did the intercooler piping and front mount. I didn't know that until I got it. I would have just done PRL if I had knew that. But his kit makes good power so far
 
Six_speed_demon said:
Yes kinda but like I said 80% of kmod kit is PRL. The manifold the Downpipe the CAI the dump tube and the turbo all came from PRL. He did the intercooler piping and front mount. I didn't know that until I got it. I would have just done PRL if I had knew that. But his kit makes good power so far
Click to expand...
Oh ok I get you now lol. Thanks for the info
 
Well I guess this qualifies!

etuza4aj.jpg


ajuvu2y7.jpg


jysume8a.jpg


ubeqynyg.jpg


azebe6en.jpg


5a6a3a9y.jpg


a4y4y8a3.jpg


zyqysyhy.jpg


jumamepa.jpg


Tomorrow just have to put the waste gate Downpipe do the boost controller put the dump pipe on and then the drain and bam the transplant will be done! Couldn't have done none of this without my right hand man Ryan! Thanks again buddy! Your the freaking best! Will be firing up tomorrow!
 
Thanks everyone!
u6ybubad.jpg


asa6are7.jpg


aqavazu4.jpg


evunudy2.jpg


uhy6aju9.jpg


y8eqe4uv.jpg


This all was possible because of my 3 great and best buddies ever Matt Gibbs which it was his storage unit Ryan Fetrow who did a lot of the work myself which helped along and Steve D aka scuba! Thank you soooo much! The car is running have to change out a coolant line it's leaking and get another gasket for the Downpipe to connect to the exhaust as it has a pretty bad exhaust leak and readjust my waste gate so the dump tube doesn't rub the subframe.

Can't wait to drive it!
 
Last edited:
Six_speed_demon said:
Thanks everyone!
u6ybubad.jpg


asa6are7.jpg


aqavazu4.jpg


evunudy2.jpg


uhy6aju9.jpg


y8eqe4uv.jpg


This all was possible because of my 3 great and best buddies ever Matt Gibbs which it was his storage unit Ryan Fetrow who did a lot of the work myself which helped along and Steve D aka scuba! Thank you soooo much! The car is running have to change out a coolant line it's leaking and get another gasket for the Downpipe to connect to the exhaust as it has a pretty bad exhaust leak and readjust my waste gate so the dump tube doesn't rub the subframe.

Can't wait to drive it!
Click to expand...

Six_speed_demon said:

View: http://youtu.be/2Mb-A8Kno0I
Click to expand...

That's just awsome dude! I take it that the install was a breeze?
 
Six_speed_demon said:
Nope I didn't drop the frame and I didn't tap the pan either PRL kits have a oil drain kit that doesn't require tapping the pan
Click to expand...
Damn that's good quality! I'm really undecided lol prl had a damn good turbo kit but merc racing is comming out with a tvs supercharger that claims that it puts out around 400 hp
 
ErckleSi said:
Damn that's good quality! I'm really undecided lol prl had a damn good turbo kit but merc racing is comming out with a tvs supercharger that claims that it puts out around 400 hp
Click to expand...

Yeah I know all about the TVS kit Jose is doing. But the PRL price is unbeatable 3999.99 for a full turbo kit that is crazy
 
You must log in or register to reply here.
Back
Top