2012 Civic Audio Wiring Guide & Pinouts For Factory Radio

Hi guys new here. I got this head unit from a salvage yard out of a 15 civic ex for dirt cheap (25 bucks) i think this one is touch screen with out nav. I just need the pin outs for the plugs. Thanks.
 

Attachments

  • IMG_20210416_083635.jpg
    IMG_20210416_083635.jpg
    4.3 MB · Views: 30
  • IMG_20210416_083617__01.jpg
    IMG_20210416_083617__01.jpg
    2.2 MB · Views: 28
Hi guys new here. I got this head unit from a salvage yard out of a 15 civic ex for dirt cheap (25 bucks) i think this one is touch screen with out nav. I just need the pin outs for the plugs. Thanks.
See the thread here

 
Hi guys new here. I got this head unit from a salvage yard out of a 15 civic ex for dirt cheap (25 bucks) i think this one is touch screen with out nav. I just need the pin outs for the plugs. Thanks.
What is it going into? I have a 12 Si with the stock non-nav unit and if this is viable I would prefer sticking in a used unit instead of buying a new aftermarket.
 
Replacing the factory navigation with Chinese android.
My factory radio 20220506_155725.jpg
New radio
20220422_195332.jpg
diagram of factory negationis that I found on another forum https://9thcivic.com/forum/threads/2...pinouts.16304/
k7m7IDo.png
This 12p cube has nowhere to plug in, and there is probably K1 and K2 in it (if I connect the factory navi without this cube, everything works except for steering wheel control - volume control and channel change)

20220502_130534.jpg
20220502_130602.jpg


In CanBus, the K1 is not plugged in anywhere and the K2 seat is empty
20220430_092321.jpg
20220430_092415.jpg

In the FAQ at https://www.aliexpress.com/item/4001...yAdapt=glo2pol point 7 and for me these cables are not plugged in anywhere Could someone suggest what to combine with what to make the steering wheel control work?
 
Replacing the factory navigation with Chinese android.
My factory radio View attachment 64756
New radio
View attachment 64757
diagram of factory negationis that I found on another forum https://9thcivic.com/forum/threads/2...pinouts.16304/
View attachment 64758
This 12p cube has nowhere to plug in, and there is probably K1 and K2 in it (if I connect the factory navi without this cube, everything works except for steering wheel control - volume control and channel change)

View attachment 64759
View attachment 64760


In CanBus, the K1 is not plugged in anywhere and the K2 seat is empty
View attachment 64761
View attachment 64762

In the FAQ at https://www.aliexpress.com/item/4001...yAdapt=glo2pol point 7 and for me these cables are not plugged in anywhere Could someone suggest what to combine with what to make the steering wheel control work?
1st are you in the Netherlands? The wiring diagrams on this site are for North America. The civic models outside North America are completely different.

2nd - someone else asked about chinese head units here and said you need something from the radio seller for steering wheel controls.

You may also have more luck at civinfo.com as they cater to civic owners outside North America.
 
For anyone that needs, here is the diagram / pinout for the non premium headunit (with and without the audio switch panel)

View attachment 56521
View attachment 56522
View attachment 56523
View attachment 56524


------------------------------------------------------------------------------------------------------------------------------------------------------------



View attachment 56526
View attachment 56527
View attachment 56528
View attachment 56529
What wires are responsible for steering wheel controls ive been trying to figure this out for a good minute
 
Back
Top