323's Build

Did some engine painting today!
7VSI2vWl.jpg

FrBS2lBl.jpg

Iv3Z8QAl.jpg


got a few more things to paint when i get some more time
 
Last edited:
Very nice! Are you doing the valve cover soon?
 
Looks good!

When you gonna take the cowl off to paint the spark plug cover? :D
 
323 said:
i dont think i have to take the cowel off, just need to find a 10mm wrench
Click to expand...


Yeah, I tried that once. Didn't work.

However one of these:

max3.jpg


or one of these:

attachment.php


may work. There isn't a lot of clearance and the bolts were longer than I expected them to be.
 
Last edited:
squiggy said:
or one of these:

attachment.php


may work. There isn't a lot of clearance and the bolts were longer than I expected them to be.
Click to expand...


this is what i was going to use, i have a bunch but all imperial measurements, not metric.
gonna run down to autozone or sears and pick one up, i'm sure it'll come in handy later anyways, seeing as how a ton of bolts in our cars are 10mm
 
You aren't a true Honda lover until you have had a car long enough to own one of these:

51Z4UwoixNS._SX522_.jpg
 
is that an o2 sensor socket?
if so, I have 2 of them lol
 
Dar-Dar said:
I have no clue what that is. :hiding:
Click to expand...


It is a crankshaft pulley removal tool. It is used for changing the timing belt. This tool is used to keep the crankshaft in place so you can turn the bolt attached to the end of the crank which keeps the pulley in place. I had to use this plus two breaker bars and a pipe to extend it in order to break the bolt free. All attached to an 18" or 24" extension.
 
You must log in or register to reply here.
Back
Top