xXFlash21Xx
Well-Known Member
Sorry for the shitty picture but sitting on skunk 2's
Photos Official Lowered Coupe Pics Thread
- Thread starter ITSMEDAVID
- Start date
Sorry for the shitty picture but sitting on skunk 2's
J-man
Member
- 10
- 0
Would 18x8 work on 13 civic coupe lx? With what offset? New to the scene. Went from a jeep to a civic lol
J-man
Member
- 10
- 0
momo
Well-Known Member
stick with an 18x8 with an offset of +40 to +30
any lower offset will require some fender work and less ride height (to look more appropriate)
the civic has a bolt pattern of 5x114.
have fun man
any lower offset will require some fender work and less ride height (to look more appropriate)
the civic has a bolt pattern of 5x114.
have fun man
J-man
Member
- 10
- 0
Thank man I appreciate it. Getting these as a graduation gift from college. Any preferences in tire sizes?
momo
Well-Known Member
225/45/18 or even a 235/45/18 is good
J-man
Member
- 10
- 0
Sweet. Gonna be stock height till I can get it lowered.
J-man
Member
- 10
- 0
Actually 225/40/18 is what they come with. Buying a package deal.
momo
Well-Known Member
will work fine. +35 offset is good too
Anybody running 235/40 on rpf1 17x9 +35.I really don't like the look of the rpf1s under x9 (that bubble face) but I'm not looking to do fender work. I asked this question a few time but no straight answers. If it doesn't work I'm open to a different choice of wheels, thank
aznboi606
Well-Known Member
h&r sports?UPDATE:
It's been about 3 months since I've installed my H&R springs. I've installed camber bolts and a rear camber kit since my last post also. Camber is set to factory specs. The springs are on HFP shocks. The front seems to have settled down a bit.
Front
Rear
JayGeeisMe
Well-Known Member
Yup. I'm on H&R sport springs and HFP Shocks.
It really comes down to how low you are, or want to be. It will fit fine with no fender work if you aren't tucking tire. If you are going fender below tire, then I would suggest a smaller tire set up with more stretch, as well as additional camber.
Thanks, im not looking to tuck. i live in NYC and the pot holes are crazy right now but just in case i do have the skunk2 rear control arms.
xXFlash21Xx
Well-Known Member
Just do alot of swerving thats all.
nat3d
Wait, I don't drive a civic anymore....
so never given specs before lol so if your asking about the wheels 17x7.5 45mm offset. the drop 1.5" on h&r springs with koni yellows
Then I think you should be fine with that setup. I don't know if you've already removed your fender liner or not, but that could help clear some room if you need to. Although I think you'll be just fine.
kennyjames
Well-Known Member
- 173
- 88
didnt see this thread till now! heres my HFP lowered on buddy club coils this was taken right after instal, it has settled a bit more
