Show me your R18... List your mods/plans if any

View attachment 56877 Hey @Tak, I just bought a bunch of parts off eBay ...T25 turbo (spools fast as hell but no top end power), an 8th gen r18 turbo manifold fits on our 9th gens, a bunch of oil feed lines and a universal intercooler kit...had to remove windshield washer pump, AC lines and cut out parts of the front bumper(as you can see, someone else could have probably done better but since its a lot of custom work I wasn't too worried about the bumper..probably will redo the plumping and see if I can get another bumper to fit without cutting) Had to delete EGR as well. Bought a catch can too cause it looks pretty haha. If you want to boost your car, Full race has a template of where to drill into your oil pan for oil drain line and where to pull oil feed from - stock oil pressure sending unit...Currently on 11lbs of boost at 298WHP and 333WTQ at 4700 RPM....cost me around $2500 but could have been way cheaper but it was a lot of trial and error...I will most likely start a build thread soon since work is winding down and I actually have time to be active again lol
Definitely need to make that happen.
 
Das my FG3 on the left, I got her about 10k ago!
ce42bc02b17f066c2dab59e10c0bed88.jpg



Sent from my iPhone using Tapatalk
 
Обновление тормозов
- Cusco тормозит пробку цилиндра
- усиленные тормозные шланги super cirquit
- передние тормоза из согласующего cl7 (300x28 мм) переднего / заднего ротора и тормозных
колодок "dixcel"

(Google translate)
Update Brakes - Cusco brakes the cylinder plug - reinforced brake hoses super cirquit - front brakes from matching cl7 (300x28 mm) front / rear rotor and brake pads "dixcel"


2847a6es-960.jpg 68f22a9s-960.jpg 456e9ecs-960.jpg
 
Last edited by a moderator:
Я точно не знаю, как это будет на английском языке. Кажется, это называется Бары. Комплект усиления Megan racing + проект r1 + Табабе стойка

(Google translate)
I do not know exactly how it will be in English. It seems, this is called Bars. Enhancement kit Megan racing + project r1 + Tababe rack

acf22a9s-960.jpg 9af22a9s-960.jpg e1f22a9s-960.jpg
 
Last edited by a moderator:
Edited posts above with translation from google. Hopefully that helps
 
I wanted to install the engine mount from "hardrace" . During installation, difficulties arose. During the correspondence with a representative of "hardrace", they found out that they take as a basis the part 50820-TS6-H81. And this engine mount for the hybrid and on r18z1 it is not compatibleScreenshot_20180201-153040.png
 
Last edited by a moderator:
Thought I’d share some pics..
2013 Honda Civic Ex

D2 springs
Fogs/rear spoiler/rear window spoiler
Front lip
All LED
6k headlight / 6k fogs
Front black emblem

had vehicle for 4 months now... still debating if I wanna keep going or leave it as it is now...
 

Attachments

  • C04EB268-CC95-4DA5-96B2-B7A7C1E5C525.jpeg
    C04EB268-CC95-4DA5-96B2-B7A7C1E5C525.jpeg
    3.2 MB · Views: 20
  • 968A657E-FFF8-4856-B4CD-1B0D3C25FDF7.jpeg
    968A657E-FFF8-4856-B4CD-1B0D3C25FDF7.jpeg
    3.6 MB · Views: 24
  • F13661DF-016B-4967-A30C-C1E8BC92F6CB.jpeg
    F13661DF-016B-4967-A30C-C1E8BC92F6CB.jpeg
    4.2 MB · Views: 22
  • 8D57CFFA-3741-4456-8A1B-FD42A82A28CF.jpeg
    8D57CFFA-3741-4456-8A1B-FD42A82A28CF.jpeg
    1.8 MB · Views: 17
Car looks good. If anything I’d say get a sway bar and some rims and call it a day.
 
Really looks nice with the drop. Rims would really set it off, but it looks nice now. Rear sway as mentioned above would make it even more fun in the twisties.
 
Really looks nice with the drop. Rims would really set it off, but it looks nice now. Rear sway as mentioned above would make it even more fun in the twisties.


Thanks guys.. newbie question.. when y’all say rear sway bar do you guys mean the end links or whole sway bar... and does it make appearance/driving any different? Some pics would be nice. I’m a moderate tuner and still need to catch up on a thing or two. Thanks
 
Back
Top