ADExternal's PMM Civic aka Orianna
- Thread starter ADExternal
- Start date
Bumpers are always going to be getting messed up, it's better to fix them up for cheap than constantly replacing or getting it professionally done, it's just not worth it when anything can happen.
It looks great though! No one but you will be able to see that it was ever scratched up.
It looks great though! No one but you will be able to see that it was ever scratched up.
innoAR
Well-Known Member
it's going to be one of those things that ONLY the owner can see what's wrong everytime he looks at that spot. sucks, but to us it looks good!
- Thread starter
- #464
ADExternal
Lvl: 99 Modifier
So when I got home today to do my sides, I found out the rubber weather stripe was coming off on one of the sides. smh, now I have to go and return and have them order another one 
Good side
Bad side
Good side
Bad side
- Thread starter
- #465
ADExternal
Lvl: 99 Modifier
Thanks Chris, The project came out to be 88$ and I have two spray cans of OEM PMM left.
Yea, thats what my buddy at the detailing shop said. Front bumpers are meant to take a beating and I shouldnt worry about it to much.
Exactly, Hopefully Ill forget about it eventually.
Pauly99to17
Well-Known Member
Looks great! Ya, you'll forget about it.
- Staff
- #467
- 52,105
- 22,314
Great results man...really impressed. Did you ever work at a body shop, or did you just learn from trial and error over the years?
- Thread starter
- #468
ADExternal
Lvl: 99 Modifier
I never worked at a body shop and is actually my first time painting a body part. Just a lot of research and youtube videos.
These are the videos I went by.
- Staff
- #470
- 52,105
- 22,314
But I'm guessing you don't have a dust free paint booth, or access to one. Just did it all in your garage?
- Thread starter
- #471
ADExternal
Lvl: 99 Modifier
Pretty much. Its was in my garage with all aerosol cans lol
jassmi
Well-Known Member
Fresh to death bro. Great job
- Thread starter
- #473
ADExternal
Lvl: 99 Modifier
Thanks! More to come, after I put on the side spoilers, Im gonna start working on the interior.
- Thread starter
- #475
ADExternal
Lvl: 99 Modifier
Sweet thanks! This is going to be next for me.
- Thread starter
- #477
ADExternal
Lvl: 99 Modifier
Lmk if you have any questions. A tip I want to add is wiring them to your rear signals is easier in my opinion but you can wire them to the front as well.
Is it easier to wire them to the rear signals due to ease of access versus going to the front? Also, you may have mentioned it, but did you wire the signals directly together or use a female/male plug somewhere in between?
- Thread starter
- #479
ADExternal
Lvl: 99 Modifier
Since I do electrical work on a daily base I had some in my box. I add a connector in the door panel the same place as the mirror controller harness connector was. I felt like it was more convenient in the future if I need to take off the mirror I can just unplug them. I linked the ones I use below.
http://www.ebay.com/itm/10-Sets-2-P...085?pt=LH_DefaultDomain_0&hash=item19e05c88ad
Yeah that's what I'm looking to do. Thanks for the link!