323's Build

323

323

Modifier
5,252
3,682
Chicago
Vehicle Model
Civic Si
Body Style
Sedan
squiggy

squiggy

Cartographer
Super Mod
11,183
6,654
Michiana
Vehicle Model
'12 Civic Si
Body Style
DBP II Coupe
323 said:
i dont think i have to take the cowel off, just need to find a 10mm wrench
Click to expand...


Yeah, I tried that once. Didn't work.

However one of these:



or one of these:



may work. There isn't a lot of clearance and the bolts were longer than I expected them to be.
 
Last edited:
323

323

Modifier
5,252
3,682
Chicago
Vehicle Model
Civic Si
Body Style
Sedan
squiggy said:
or one of these:



may work. There isn't a lot of clearance and the bolts were longer than I expected them to be.
Click to expand...


this is what i was going to use, i have a bunch but all imperial measurements, not metric.
gonna run down to autozone or sears and pick one up, i'm sure it'll come in handy later anyways, seeing as how a ton of bolts in our cars are 10mm
 
squiggy

squiggy

Cartographer
Super Mod
11,183
6,654
Michiana
Vehicle Model
'12 Civic Si
Body Style
DBP II Coupe
Dar-Dar said:
I have no clue what that is. :hiding:
Click to expand...


It is a crankshaft pulley removal tool. It is used for changing the timing belt. This tool is used to keep the crankshaft in place so you can turn the bolt attached to the end of the crank which keeps the pulley in place. I had to use this plus two breaker bars and a pipe to extend it in order to break the bolt free. All attached to an 18" or 24" extension.
 
You must log in or register to reply here.
Top