SpaceJam
Well-Known Member
Has anyone been able to run a double high beam set up with their retrofit? I was thinking about getting a high beam splitter but I have and LED kit with a Canbus for my high beams / DRL and don't know if it will work.
High beam splitters with LED kit
- Thread starter SpaceJam
- Start date
- Staff
- #2
- 52,105
- 22,314
Customlightz did a quad retrofit in a 9th gen.
One of these vids shows him wiring it if I recall correctly
http://9thcivic.com/forum/threads/2012-civic-hid-retrofit-headlight-installation.2531/
One of these vids shows him wiring it if I recall correctly
http://9thcivic.com/forum/threads/2012-civic-hid-retrofit-headlight-installation.2531/
- Thread starter
- #3
SpaceJam
Well-Known Member
Yeah I was watching through those to see if they had any answers. I think I'll just order some splitters and try it out since they're pretty cheap. It'll be a little while before I do it but I'll post my results here.
- Thread starter
- #4
SpaceJam
Well-Known Member
So I think I figured it out. It's hard to tell from the picture but here's the order I have it in. The CANbus is plugged into the stock high beam and the high beam splitter is plugged into the CANbus. The blue side of the splitter is plugged into the solenoid for projectors and the red side is plugged into the LED kit that I use for my high beam/DRL. I'll post pictures of the double brights in action tonight!
Sarcras
Well-Known Member
I used the same thing for my setup. LEDs for the DRL/Highbeams. Used a splitter from Retrofit Source and it plugged right in to everything. Double brights are incredibly awesome by the way!
- Thread starter
- #6
SpaceJam
Well-Known Member
Awesome! It can't get dark fast enough lol. I can't wait to try them out
- Thread starter
- #7
SpaceJam
Well-Known Member
Here's the best I could do with my iPhone. With different brightness settings on the camera, the first two are low beam and the second two are high beam. Double high beam is great lol
