Official 'What did you do to your car today?' Thread

Assuming you removed it, cleaned it, and let it dry all outside, right? Any slight breeze and that stuff finds its way into a hole or attaches to wet filters like murder hornets on honey bees. Glad it was a simple fix alt least.
 
AlmosN8kd said:
Assuming you removed it, cleaned it, and let it dry all outside, right? Any slight breeze and that stuff finds its way into a hole or attaches to wet filters like murder hornets on honey bees. Glad it was a simple fix alt least.
Click to expand...

Yes blowing it out with compressed air initially got rid of it but I cleaned it and let it dry outside before reinstalling it :thumbsup:
 
tighten lug nuts on one side of my Honda civic SI with New Hyper gram rims and firehawks 500 225 45 17 tires. Also added a 2019 Ford 250 Van long wheel base Van to my collection.:bunny::beer:
 

Attachments

  • DSC00339.JPG
    DSC00339.JPG
    416.2 KB · Views: 12
  • DSC00338.JPG
    DSC00338.JPG
    471.2 KB · Views: 11
  • DSC00336.JPG
    DSC00336.JPG
    513.2 KB · Views: 10
AlmosN8kd said:
Assuming you removed it, cleaned it, and let it dry all outside, right? Any slight breeze and that stuff finds its way into a hole or attaches to wet filters like murder hornets on honey bees. Glad it was a simple fix alt least.
Click to expand...
Loving that analogy. Definitely gonna use that myself :rotfl:
 
I called steve today at etunez about the honda si, I am sending mod info. Just the 3.5 intake Hondata tune right now. I have a full custom 3" exhaust with HP cat with duel mufflers to put on and Hasport rear engine mount with torque solutions exhaust mounts. Have installed the acurity cold air intake. This will make the Honda si have well over 200HP. I will be tuning for 93 gas. Today, I am getting my TNPS sensors turned on with the computer. I have installed special Koing Hypergram rims and Firehawk 500 tires-very sticky tires. By the end of month, it will be a different car:box::dogdance: Very sporty.:driving::corngrin:
 
sunofwolf said:
Just the 3.5 intake Hondata tune right now. I have a full custom 3" exhaust with HP cat with duel mufflers to put on and Hasport rear engine mount with torque solutions exhaust mounts. Have installed the acurity cold air intake. This will make the Honda si have well over 200HP.
Click to expand...


im gunna say 190 to the wheels :rockwoot:​
 
185 with just the cai-the exhaust is a full 3"-it should be well over 200HP with a 93 tune.:banana whip2: that includes 3" down pipe. Not much else is going to make much HP except a turbo or SC.
 
not even my slr shots will upload now without reducing the file size. Why all of the sudden?
 
Installed fog lights. Cars dirty, barely got home from being out for two months. Trying to do some touch ups. Installed all LED's too. I installed resistors and they stopped hyper flashing, but I noticed earlier that they randomly went back to hyper flashing and then normal? I got the fogs for $120 off Amazon OEM.
106358179_595705994697363_4268621258622673663_n.jpg

105535352_951942508560092_4283791719453461971_n.jpg

105971201_267564701134339_721859395940124563_n.jpg

105576732_283554619668296_1949120514076048312_n.jpg

105908768_271562167268412_6756438599459471215_n.jpg
 
Verzerrung said:
Installed fog lights. Cars dirty, barely got home from being out for two months. Trying to do some touch ups. Installed all LED's too. I installed resistors and they stopped hyper flashing, but I noticed earlier that they randomly went back to hyper flashing and then normal? I got the fogs for $120 off Amazon OEM.
106358179_595705994697363_4268621258622673663_n.jpg

105535352_951942508560092_4283791719453461971_n.jpg

105971201_267564701134339_721859395940124563_n.jpg

105576732_283554619668296_1949120514076048312_n.jpg

105908768_271562167268412_6756438599459471215_n.jpg
Click to expand...

Those foglights look nice!

Was the install hard? I want to add some to my car for when I have to go over the lake area to work -- it's always freaking foggy.
 
It wasn’t too hard, I got them for $120. They came with everything you need and it’s OEM. I followed a YouTube video and a PDF.

I tried my best to do my trunk out of hardwood today. It came out okay and I know I can do better, but it’s good enough for the time being. I’m waiting on some rubber trim to edge up against the side of the wood for a clean look.
 

Attachments

  • 94D24EE6-061E-4058-B8A8-D2E322791BF6.jpeg
    94D24EE6-061E-4058-B8A8-D2E322791BF6.jpeg
    149.2 KB · Views: 13
Verzerrung said:
I tried my best to do my trunk out of hardwood today. It came out okay and I know I can do better, but it’s good enough for the time being. I’m waiting on some rubber trim to edge up against the side of the wood for a clean look.
Click to expand...

Not my thing but looks good :thumbsup:
 
I’m still looking, but I drive semis across country and I don’t have time to wait on something to come in Since I’m only home for four days, so I just gave it a shot with whatever was available and I can work on a better template and material later on to get it where I want it.

I’m not crazy about the color either, but in time I’ll get maybe a cherry wood.

thanks booty! Figured I’d see how it looks and try it out.
 
You must log in or register to reply here.
Back
Top