New Year, New ride... 13' Fit!

Status
Not open for further replies.
I have some light tail light tint but that won't go on until next weekend when my roommate gets back in town. Need two pairs of hands....
 
So.... you extended the wing out a little bit? Interesting touch. You wanted to make it more noticeable and not so blended into the body?
 
bootyluvr said:
Garage.. I'm jelly! :(
Click to expand...

2 car garage....wut wut!

Nix said:
So.... you extended the wing out a little bit? Interesting touch. You wanted to make it more noticeable and not so blended into the body?
Click to expand...

Just tilted the rear of the wing up. The screws/nuts I used act like a spacer to push the rear of the wing up. It is actually adjustable so I can tilt the wing up more is wanted. Makes it stand out a bit more.

ethlar said:
downforce!
Click to expand...

F yeah! that's the only reason to do it!
 
ahhh:pat:

BOMwR_zps787dac5f.gif
 
Looks like every wheel has some rash or bad rash too? At least one fender looks like it's damaged on the lip maybe too. Think it was stanced at one point?
 
Def stanced out. Both front fenders have been worked on and paint chipping off. Can't really tell if the rears were worked on. I would walk in the dealership and ask for $14.5 price.
 
Nomar06 said:
Def stanced out. Both front fenders have been worked on and paint chipping off. Can't really tell if the rears were worked on. I would walk in the dealership and ask for $8k OTD price.
Click to expand...
fixed
 
I've seen clean S2k with a lot less miles selling for $15k. This one is worth maybe $10k.
 
You know the oil pan and subframe are probably all scratched to hell too. Probably major gouging based on the shoddy fender/fitment work they did. Ill bet a lot of the suspension bushings and parts have been extended, stretched, and stressed pretty hard being that low and banged into things, like the road, curbs, etc.... you know those ball joints are going to be ruined cause, if they chipped the heck out of their paint, they certainly didn't get extended ball joints to lower the car properly. Looks like it's still on the lowest setting for whatever coilovers they got a "good deal" on too. hahahah

When I see something like those fenders, it just says they cut corners cause they didn't have the time, money, sense, or ability to know how to do things properly.

I bet there is a lot of hidden work to be done. Just my .02
 
Nix said:
You know the oil pan and subframe are probably all scratched to hell too. Probably major gouging based on the shoddy fender/fitment work they did. Ill bet a lot of the suspension bushings and parts have been extended, stretched, and stressed pretty hard being that low and banged into things, like the road, curbs, etc.... you know those ball joints are going to be ruined cause, if they chipped the heck out of their paint, they certainly didn't get extended ball joints to lower the car properly. Looks like it's still on the lowest setting for whatever coilovers they got a "good deal" on too. hahahah

When I see something like those fenders, it just says they cut corners cause they didn't have the time, money, sense, or ability to know how to do things properly.

I bet there is a lot of hidden work to be done. Just my .02
Click to expand...

Probably it had 10" width wheels and 205 width tire. It's all about "breaking necks" on facebook groups and instagram.:pat:
 
  • Like
Reactions: Nix
Status
Not open for further replies.
Back
Top