ultimate racing downpipe

what is the gain on this ultimate racing downpipe header? can i run that and also run full race exhaust at the same time?
 
ultimate racing downpipe with ultimate racing catback exhaust dyno
==
===

F0tL2.jpg


====
====

fullrace is 3" catback... as well as the ultimate racing catback for the 2012. So, in theory... it should be very close to the numbers above
 
So guys what do you all think going UR downpipe 3" with the stock exhaust 2.25 I think? will it work just fine? or better not
 
I did a drive by with my newly installed ur downpipe. Remember I also have installed invidias mach1 exhaust and ingen intake. The dp has no cats. sorry for the video/sound quality but this is what i have at the moment. The exhaust ppe is 2 & 3/4
 
Thank you for the video - :thumb:


View:
View: http://youtu.be/HdwbjKaOkMU


Not to take the thread of-topic, but it looks from the reflection in the video that the go pro was atttached using the sauction cup accessory. Is that right, and if so, did you do anything special to adhere it to the car, or add a redundancy in case it fell off at speed. I ask beecause I made a magnetic mount, but don't fully trust it. I bought the suction cup mount, but planned to use it only inside the car. Thanks.
 
The gopro suction cup mount is very very strong. The instructions even note that it can withstand 100+ mph wind resistance. Latch it on your windshield and try to remove it without releasing the latch.
 

View: http://www.youtube.com/watch?v=3sPW1ylM-SU

jump to 45+ seconds in...

150+mph gopro on a plane with gopro suction cup mount. Bunch of similar vids where people have put one on their planes and it worked. Big thing would just be to make sure the surface is clean you're mounting the cup to, and making sure all of the screws are tight.

I know there are vids of cars making 8 second passes in the quarter mile with them attached on yt.
 

View: http://www.youtube.com/watch?v=3sPW1ylM-SU

jump to 45+ seconds in...

150+mph gopro on a plane with gopro suction cup mount. Bunch of similar vids where people have put one on their planes and it worked. Big thing would just be to make sure the surface is clean you're mounting the cup to, and making sure all of the screws are tight.

I know there are vids of cars making 8 second passes in the quarter mile with them attached on yt.

cool. thx webby.
 
I did a drive by with my newly installed ur downpipe. Remember I also have installed invidias mach1 exhaust and ingen intake. The dp has no cats. sorry for the video/sound quality but this is what i have at the moment. The exhaust ppe is 2 & 3/4
how do you like the mach 1 exhaust? i saw a vid on youtube (idk if that was you or not) and it sounds really nice and loud, thanks!
 
Back
Top