- Thread starter
- #161
Pretty clear that your camera doesn't work past 12:13
So after the 12:13pm alert today.. I left the house around 4pm and no alert.
Came home around 8pm and no alert.
So ******* annoying.
I don't know if your settings are like these?
is it on all motions or only human? Sensitivity high?
=====
3. Detection Type – only human/all motions
4. Sensitivity – low to high
1. Detection Mode
![]()
Clearly, it starts with making sure you have the Detection Mode enabled.
2. Activity Zone
Next, you have the Activity Zone configurator. That currently supports a hexagon of 6 points for you to drag around with. It’ll take you a bit of fidgeting to get it right, and the interface might feel a bit clumsy too.
But it works.
![]()
![]()
If your Activity Zones are inefficiently set up, there might be your instant problem (and solution).
Only Human / Sensitivity 3 (Default)
No activity zones set. When I had all motions enabled I had activity zones as it was alerting too much. But with Only Human I don't have any zones.
Thanks for the help. I might move the doorbell to the opposite side where it's at now. Other side of the front door.. Hmm