Squiggy's 2012 DBP II Si Coupe
- Thread starter squiggy
- Start date
- Thread starter
- Staff
- #803
- Thread starter
- Staff
- #804
There's gotta be more than one way than those roads, i'd rather drive a little longer to stay on better roads. But if it's 5 months away count me in! Plenty of time to prepare but i may be running stock first time around. CDV delete is a soon must as is the hybrid racing bushings and RMM (or epoxy filled) not sure yet.
Nix
Jötunn Moderator
Tis worth it. The closest city is Knoxville and the Dragon itself is in TN. The roads in NC just over the border are equally as good and without the police/tourist/harley presence.
Pauly99to17
Well-Known Member
Please don't install these because I will end up needing to buy them after I see.These look to be the same as what I have.
Example lit up at night (or in the dark).
- Thread starter
- Staff
- #809
I cannot install the ones I have because they are too big, but I plan on trying to custom fabricate some in a size that fits.
Pauly99to17
Well-Known Member
For the record.... I will be jealous.
- Thread starter
- Staff
- #811
I also have some blue Lamin-X film for the headlight housings as well...
Pauly99to17
Well-Known Member
Damn....I can just imagine them. 
- Thread starter
- Staff
- #813
I have a lot of work to do on the car in the next few weeks.
Find a shop to clone my TPMS sensors.
Clean the calipers up and repaint them since they will be more visible.
Do the fab work for the Konis.
Find some decent red lugs.
Get an alignment done since I will be pulling the struts out.
Maybe find some white caps with red H's.
Find a shop to clone my TPMS sensors.
Clean the calipers up and repaint them since they will be more visible.
Do the fab work for the Konis.
Find some decent red lugs.
Get an alignment done since I will be pulling the struts out.
Maybe find some white caps with red H's.
- Staff
- #814
Don't bother with the red lugs....they will be pink in a short period of time.
The red tow hook I have is already turning and it has been on the car for maybe a month.
The red tow hook I have is already turning and it has been on the car for maybe a month.
- Staff
- #815
- 52,105
- 22,314
Anodized? Powdercoat? Paint?
- Thread starter
- Staff
- #816
Well, I sure as hell don't want black or chrome on white wheels.
Jason2k15si
Member
- 13
- 4
Wow i need time to analyze this info lol deff some nice mods. i got a long way to go.View attachment 27863
View attachment 26177
View attachment 26176
View attachment 26178
View attachment 26179
View attachment 26180
I hope to get pics of the interior mods up soon.
Exterior Mods
Red Painted Calipers [DIY]
Color Matched Door Edge Guards (OEM) [DIY]
Sticker/Badge Removal[DIY]:
•Civic badge
•iVTEC sticker
•Dealer Sticker
Front Bumper Plate Holder removal
Tint - 30% all around
Red JDM Badge - Front [DIY]
Red JDM Badge - Rear [DIY]
TaoTronics Backup Camera
•License Plate Frame Style
HFP Front Lip Kit
Wheels
Summer
•17x8 OZ Racing Alleggerita HLT - White
•245/40/17 Michelin Pilot Supersports
Winter
•Black 16" steelies
•205/55/16
Engine Mods
Red Venair Silicone Performance Coolant Hoses [DIY]
RBC Intake Manifold
•Bored to 70mm
•Painted Red
RDX 410cc Injectors
ZDX 70mm Throttle Body w/ RBC Adapter Plate
•Painted Black
P2R Intake Manifold Thermal Gasket
P2R Throttle Body Thermal Gasket
Hasport Rear Motor Mount w/ street bushing
•NGK ILKR8E6 1422 (for eventual Turbo install)
Exhaust Mods
Full Race Downpipe - catted
Full Race Full Exhaust
•Combined DIY
Suspension Mods
Moog Endlinks (greasable)
•front
•rear
Progress 22mm Rear Sway Bar [DIY]
•includes endlink reinforcement brackets w/ third hole drilled
Energy Suspension 22mm Polyurethane Greaseable Sway Bar Bushings
•with angled Zerk fittings
SPC Front Camber Bolts
SPC Camber Arms
H&R Sport Springs
Moog Rear Sway Bar Bushings
Transmission Mods
CT Engineering Short Shift Adapter [DIY]
CorSport Aluminum Base Bushings [DIY]
PRL Stainless Steel Clutch Line
Hybrid Racing Shifter Cable Bushings
Speed Bleeder
DOT 4 Fluid
Moddiction Anvil Counter-sunk Shift Knob - Red
•boot clipped with modified stock retainer
MTEC Springs (on hand - to be installed)
MTEC Pivot Ball (on hand - to be installed)
Brake Mods
Speed Bleeders (on hand - to be installed)
DOT 4 Fluid
Interior Mods & Accessories
Trunk Tray (OEM)
Cargo Net (OEM)(install in progress) [DIY]
Cargo Hooks (OEM) (on hand - to be installed) [DIY]
Factory Alarm Stickers Removal [DIY]
WeatherTech DigitalFit Floor Liners
Red JDM Steering Wheel Emblem [DIY]
Red JDM Hazard Switch [DIY]
Red Vinyl Door Piping (on hand - to be installed) [DIY]
YoSpeed "Si" Cup Holder Cover
Lighting
Nokya Hyper Yellow Fog Lights
White LED License Plate Light
Red LED Dome Light
Red Ambient Lighting Kit (OEM) [DIY] or [DIY]
•switch backlight swapped with red bulb
White LED Map Lights
Sunroof Switch backlight swap with red bulb
VSA Switch backlight swap with red bulb
Retrofit to be done...eventually
•Mini H1's (one set on hand)
•6k HIDs (on hand)
•8k HIDs (on hand)
•LED and Halo
Audio
Pioneer AVH-X5500BHS Multimedia Receiver
• aux port modded to use with stock housing
• with parking brake bypass
Metra Dash Kit
Metra Harness
Metra Speaker Mounts
Polk DB651s 6.5" Rear Speakers
Pioneer TS-SW841D 8" Sub x2
Pioneer UDSW80D 8" Sub Box x2
Pioneer PRS-D800 2 Ch Amp
Pioneer GM-6500F 4 Ch Amp
Axxess AWS-1 Steering Wheel Control Interface (on hand - to be installed)
Pioneer CD-IU51V Ipod Cable
Other
OBD Bluetooth Adapter
Torque Pro Android App
FIAMM 72112 Horn - Low Tone [DIY]
FIAMM 72012 Horn - High Tone [DIY]
AC Condenser Bumper Screen - Painted Red [DIY]
Magnetic Transmission Fluid Drain Bolt
Magnetic Oil Drain Bolt
FatMat 40 mil Sound Deadener - Rear Deck
GTMat 80mil Sound Deadener - trunk and rear wheel wells
Hondata FlashPro
DeatschWerks DW65c Fuel Pump (on hand - to be installed)
Hondata 4 Bar Map Sensor (for eventual Turbo install)
Fluids Used
Amsoil 0W-20 Synthetic Oil
Honda MTF
Engine Compartment Cosmetics
Red Painted [DIY] or [DIY]:
•Fuse Box Cover
•Spark Plug Cover Cover
•Windshield Washer Fluid Cap
•Transmission Fluid Cap
YoSpeed Battery Tie Down - Red w/ "i-VTEC" lettering
Future Mods
Sliding Arm Rest (maybe)
Heated Seats (maybe)
Additional Interior LED lighting
Interior backlighting swap (in Progress...somewhat)
Dead Pedal Upgrade (maybe)
BBK
Stainless Steel Brake Lines
1000cc Injectors
Clutch and Lightweight Flywheel
Turbo!
View attachment 26909
Nix
Jötunn Moderator
If you're ok with buying a new set every couple years the $25 sets of basic spline drive lugs from NLmotoring aren't bad. I have the black ones and they are a little rusty after a couple years but really not bad at all considering how cheap they are. Besides if the red fades in a season you're only $25 for a new set. They are definitely painted so being careful when installing will help. I get mine done the quick way at Sears and they just hit em fast as they can with an impact gun. Considering that abuse the finish holds up pretty well.
Ooh the price went up, $26.99 now... hahaha
http://www.nlmotoring.com/Tuner-Lug-Nuts-Spline-Drive-Red-12x1-5-p/wlns12x1.5r-20.htm
Ooh the price went up, $26.99 now... hahaha
http://www.nlmotoring.com/Tuner-Lug-Nuts-Spline-Drive-Red-12x1-5-p/wlns12x1.5r-20.htm
- Thread starter
- Staff
- #820